GULFF Clear Resin Fatman, 50ml
Fatman is design mostly for bigger flies, it is perfect for pike fly heads. Compared to classic it’s more thick so you got more time to work on shape of head etc. Design, create and pimp fantastic flies by using wide range of GULFF UV resin products. All the products are high quality and tack free quaranteed. We have designed out resins and UV flashlights especially for fly tying by following strickly UV resin professionals’ demands. Gulff is, for instance, an only manufacturer offering 365nm UV flashlight for fly tying.
GULFF UV Resin products can be used for realistic flies, strike points, predator streamers, worms, dark details, fly body building and clear finishing,. Anything. You create.
HOW TO GET QUALITY RESULTS
The resin should be cured by taking a UV flashlight and holding it at a distance of 1-2 cm from the surface of the resin, evenly directing the light towards each side of this surface. With a powerful light, colourless GULFF UV resins will cure in a matter of seconds. We recommend using the GULFF UV flashlight. After curing, allow the surface of the resin to cool for about 5 seconds, without touching it. If the resin surface has been cured properly, it will be either shiny or matte, depending on the choice of resin, but it will always be free of stickiness. However, if the surface of the resin remains sticky for a long period of time after being exposed to the light, ensure that the flashlight’s batteries are at full power, that the flashlight was at a distance of about 1 cm from the resin, and that the fly does not contain any oily materials. Note that coloured resins take longer to cure than clear ones. Also, remember to change / charge your flashlight’s batteries appropriately often: even a small decrease in battery power will reduce the effectiveness of curing.
HOW TO CHOOSE THE RIGHT TYPE OF UV FLASHLIGHT
Experts recommend always using a powerful UV flashlight (e.g. 365nm/3w). Keep in mind that the inexpensive, general-purpose 395-405nm UV flashlights available on the market are not the best possible options for UV resins. Inexpensive UV flashlights are often low-wattage and of variable quality. The quality differences are due to the fact that no standard model of UV light source is used in them, the advertised wattages are maximum values, and the light-guidance mechanisms they have may not be suitable to the purpose. Note that not all UV flashlights are appropriate for fly-tying. UV flashlights that are specifically meant for fly tying have special light-guidance mechanisms, as they are designed to be brought close to the target object. By choosing the GULFF UV flashlight, you can be sure you are using a flashlight meant for fly tying.
Take note of safety related issues mentioned on the packaging. GULFF resin is very quick-drying resin, and can cause harm if used improperly. There is a very high risk of harm if the resin gets onto the skin and UV light hits the surface of skin that has been smeared with the resin. A burn may form on the skin, or the glue may become stuck to the skin. When handling the resin and UV light, protect the eyes and avoid skin contact. The chemicals should always be used in a well-ventilated space. The resin must absolutely be kept out of the reach of children. Note that the resin cures under sunlight as well. UV resins heat up when exposed to light.